If you find a leak in one of your coolant hoses chances are that there will be another failing soon! We have put together a kit with the hoses you will need so you only need drain your coolant (and get dirty) once! Nine hoses included (three missing from photo).

Kit consists of:

1 - r94410625100 - o.e.m. Rubber hose

1 - r94410624502 - o.e.m. Radiator hose

1 - r94410623707 - uro radiator hose - lower

1 - t94410623906 - radiator hose

1 - r94410623501 - water hose #1559

1 - r94410624104 - o.e.m. Rubber hose

1 - g94410625301 - rubber hose

1 - g94410624307 - cooling water tube

1 - r95110624901 - elaplast radiator hose

General Fitment

If you find a leak in one of your coolant hoses chances are that there will be another failing soon! We have put together a kit with the hoses you will need so you only need drain your coolant (and get dirty) once!

Kit consists of:

1 - g95110624503 - radiator hose

1 - t95110623704 - radiator hose - eta two weeks

1 - s95110624101 - radiator hose - eta two weeks

1 - t95110632102 - o.e.m. Water hose

1 - t95110623901 - dayco radiator hose

1 - r95110624901 - elaplast radiator hose

1 - g95110632202 - rubber hose

General Fitment

If you find a leak in one of your coolant hoses chances are that there will be another failing soon! We have put together a kit with the hoses you will need so you only need drain your coolant (and get dirty) once!



Kit consists of:

1 - s94410625100 - expansion tank hose

1 - g94410621705 - water hose

1 - t95110623704 - radiator hose - eta two weeks

1 - g94410623911 - radiator hose

1 - r94410624104 - o.e.m. Rubber hose

1 - g94410625301 - rubber hose

1 - r95110624901 - elaplast radiator hose

1 - g94410623604 - rubber hose

General Fitment

As we all know the only way to install the optional oil pressure gauge is to replace the oil pressure switch with the much "fatter" oil pressure sender. this cannot be accomplished without cutting the sheet metal or extending the hole out of the sheet metal and attaching the sending unit. this hose will give you the needed length. (might need to grind down the male end for a proper fit)

Note: dual sending unit sold separately, part number rvdo360023 or rvdo360006.

General Fitment

Our vacuum line kits solve the lean running, poor performance, and high/low idle caused by vacuum leaks! Custom cut, colorful, and easy to install, new vacuum lines also dress up your engine compartment! Kit comes complete with vacuum cartoon for easy installation.

General Fitment

Continuing the process of building the ultimate Porsche 996tt, agency power has developed these highly engineered and proven silicone boost hose kits. Like any turbo charged vehicle, air needs to flow in the most efficient way to maximize performance. At a certain level, factory components will not produce the same results. Agency power's silicone boost hose kit replaces the 4 factory rubber boost hoses with these high quality and purpose driven silicone kit. The silicone hoses each have a precision cnc machined 6061 aluminum ends for a secure and direct fit into the factory or aftermarket intercoolers and intake manifold. Each machined aluminum part is barbed to give a secure fit and then the silicone is clam...(choose a part on the right to read more)

General Fitment

Our vacuum line kits solve the lean running, poor performance, and high/low idle caused by vacuum leaks! Custom cut and easy to install, new vacuum lines also dress up your engine compartment! Kit comes complete with vacuum diagram for easy installation. kit does not include the large 19 mm hose. Picture is representative only.

General Fitment

Replacement reinforced boost hose kit. Eliminate a common problem on the 993 turbo. On most all modified 993 turbos the OEM boost hoses will leak and blow out with higher boost pressure under acceleration. These hoses will also begin to deteriorate and leak as they age. Replace your OEM hoses with this reinforced boost hose kit. All of these hose kits are pressure tested and will not burst even under the most extreme operating and environmental conditions. This reinforced boost hose kit comes as a complete bolt on kit.
From turbo to intercooler
43 / 57 mm x 410 mm

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock...(choose a part on the right to read more)

General Fitment

If you find a leak in one of your coolant hoses chances are that there will be another failing soon! We have put together a kit with the hoses you will need so you only need drain your coolant (and get dirty) once! seven pieces to this kit.
Kit consists of:

1 - r94410623904 - dayco radiator hose

1 - t94410624501 - radiator hose

1 - v94410623705 - radiator hose

1 - t94410624103 - coolant hose

1 - r94410624901 - elaplast radiator hose

1 - s94410625100 - expansion tank hose

1 - s94457238301 - o.e.m. Heater hose

General Fitment

As the horsepower on your 997 turbo increases, so does the need for preventative products to ensure your boost is holding strong. The stock boost hoses are much like a rubber brake line that expands outwards under pressure. This causes a loss in boost pressure and can sometimes relate to the hose blowing off the turbo or y-pipe leaving you stranded. Because the agency power silicone boost hoses are made from 4ply silicone with cnc machined 6061 aluminum ends, they will never pop off. The property of the silicone also keeps it at a fixed circumference as the silicone will not expand.

The new agency power Porsche 997 turbo boost hoses are sold as a set of 4 to replace your 2 top hoses off the y-pipe to the int...(choose a part on the right to read more)

General Fitment

Silicone boost hose kit FVD's direct replacement boost hose kit eliminates common boost hose "blow outs" on modified turbo's. Facts: tested to withstand over 75 psi (5 bar) boost pressure.fuel and oil resistanttemperature range between - 50 to + 180 degreesbolt on kit over time the OEM boost hoses tend to expand and contract under higher load, which leads to leaks, or "blow outs". Also, the OEM aluminum end does not secure properly into the intercooler, which causes boost leaks, and boost hose blowouts. Our machined billet ends are a perfect secure fit and our silicone hose is designed not to expand under boost pressure. The hose kit is a complete bolt on kit.

This item may need to be sourced from germ...(choose a part on the right to read more)

Silicone boost hose kit

FVD's direct replacement boost hose kit eliminates common boost hose "blow outs" on modified turbo's.

Facts:

tested to withstand over 75 psi (5 bar) boost pressure.
fuel and oil resistant
temperature range between - 50 to + 180 degrees
bolt on kit


Over time the OEM boost hoses tend to expand and contract under higher load, which leads to leaks, or "blow outs". Also, the OEM aluminum end does not secure properly into the intercooler, which causes boost leaks, and boost hose blowouts.

Our machined billet ends are a perfect secure fit and our silicone hose is designed not to expand under boost pressure. The hose kit is a complete bolt on kit.

Thi...(choose a part on the right to read more)

General Fitment

Special intake hose kit for enhanced performance vehicles.

The original plastic tubes are restrictive on one side and have different lengths. Our reinforced suction hoses kit replaces the narrow and different lengths plastic tubes. This is a perfect homogeneous intake air guide from the intake manifold to the turbocharger and provides a smooth power delivery.

Design to withstand the vacuum pressure and will not collapse.

Made for the 993 GT2 racecars.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

For adaptation of GT2 intake tube.

General Fitment

Product details:

Our direct replacement silicone boost hose kit will eliminate a common boost leakage failure problem on the 996 tt and especially modified high horsepower 996 tt cars.

Features:

-fits all Porsche 996 GT2 vehicles (2001-2005)
-on most all modified 996 tt the OEM boost hoses will leak and even blow out under acceleration leaving you with a loss in power and even stranded with a car that will not run.
-made out of high quality air craft quality silicone. Comes with cnc machined billet aluminum hose ends, shiny red or black are the color choices.
-successfully tested up to over +1000 hp twin turbos.
-guaranteed no...(choose a part on the right to read more)

General Fitment

This kit includes everything you need to update your 9pa Cayenne coolant system. the factory used a kit very similar to this to avoid costly repairs on the old plastic tubing. replacing these hoses is quite time consuming, so be sure you don't have to do it again by using this kit with OEM metal tubes. assembled with factory components, so you can be assured it is quality.

Kit consists of:

1 - g94810604907 - coolant pipe, lower. - normally $331.12

1 - g94810605906 - as coolant pipe - normally $362.15

1 - g94810623000 - neck, coolant pipe. - normally $72.94

1 - g94810624000 - hose, coolant pipe, l - normally $19.76

1 - g94810625900 - fastening bracket, up - normally $32.49

1 - g9481...(choose a part on the right to read more)

General Fitment

In the early 1970s the factory authorized a recall of all 914s for replacement of the cloth covered upper fuel lines with high pressure rubber covered ones impervious to battery acid. Now you too can duplicate the factory procedure with this high pressure kit including the pre-bent injector elbows and special nonintrusive clamps.
Kit consists of:

1 - b7mmidhose - 9 feet of 7mm id hose for fuel line kit - high pressure hose smooth

14 - r99951205502 - hose clamp 12mm

4 - b043133387 - 914 fuel injector line elbow

General Fitment

If you find a leak in one of your coolant hoses chances are that there will be another failing soon! We have put together a kit with the hoses you will need so you only need drain your coolant (and get dirty) once!

Kit consists of:

1 - r93110615700 - oe supplier radiator hose

1 - g810819371g - rubber hose

1 - g047121621a - rubber hose

1 - r046121051 - o.e.m. Engine coolant hose

1 - s046121061 - gates radiator hose

General Fitment

If you find a leak in one of your coolant hoses chances are that there will be another failing soon! We have put together a kit with the hoses you will need so you only need drain your coolant (and get dirty) once! Eleven hoses included.

Kit consists of:

1 - r94410625100 - o.e.m. Rubber hose - normally $11.00

1 - g94410621702 - rubber hose - normally $222.75

1 - s95110623704 - elaplast radiator hose - lower - normally $28.00

1 - t94410623906 - radiator hose - normally $10.65

1 - g94410609101 - water hose. - normally $456.19

1 - r94410623501 - water hose #1559 - normally $4.49

1 - r94410624104 - o.e.m. Rubber hose - normally $6.75

1 - r94410625301 - genuine Porsche rubber hose -...(choose a part on the right to read more)

General Fitment

Manufactured by the original supplier for Porsche, this three piece oil line kit instantly solves the long search for th e proper oil lines for your six.
Kit consists of:

1 - r90110782303 - oil hose 914-6

1 - r90110771004 - oil hose 914-6

1 - r90110782100 - oil hose 914-6

If you find a leak in one of your coolant hoses chances are that there will be another failing soon! We have put together a kit with the hoses you will need so you only need drain your coolant (and get dirty) once! Eight hoses included.

Kit consists of:

1 - r94410625100 - o.e.m. Rubber hose

1 - g94410621705 - water hose

1 - s95110623704 - elaplast radiator hose - lower

1 - g94410623911 - radiator hose

1 - r94410624104 - o.e.m. Rubber hose

1 - r94410625301 - genuine Porsche rubber hose

1 - r95110624901 - elaplast radiator hose

1 - g94410623604 - rubber hose

General Fitment

If you find a leak in one of your coolant hoses chances are that there will be another failing soon. We have put together a kit with the hoses you will need so you only need drain your coolant (and get dirty) once.

Kit consists of:

1 - s046121061 - gates radiator hose

1 - g93110626701 - rubber hose

1 - r93110615700 - oe supplier radiator hose

1 - r046121051 - o.e.m. Engine coolant hose

General Fitment

7mm hose - smooth